Printing time requirement: 3 hours
Building time requirement: 25 minutes
Materials:
- XRP robot kit
- Soccer robot parts (Kicker, Frame, Servo Mount)
- Rubber band
- Screwdriver
Objective:
This tutorial will guide you through creating a Soccer robot using your XRP robot kit!
Step 1, Mechanical Assembly:
Use the long screws to mount the kicker to the frame from either side. The screws will thread into the 3d printed part.
Use the servo mount and the short screws to attach the servo to the frame.
wrap the rubber band between the two hooks.
Clip the frame onto the front rail of your XRP robot.
Step 2, Electrical assembly:
Plug the servo into the “servo1” port of the XRP board. Make sure the connector is flipped the right way. Brown to Gnd, red to 5V, orange to Signal.
Step 3, Bdazzel!:
Every robot needs googly eyes! Congratulations, you now have a Soccer Robot!
